Code-3 21TR & 21TR Plus Manual do Utilizador descarregar pdf (Página 12)

ArrowStik® Pattern Selection

The 21TR Plus™ is designed to offer user selectable traffic directing signals and traffic warning options.

This allows the greatest exibility when controlling the various congurations available. The end user can match the desired sig-

nal to a particular light bar conguration whether it is a 5, 6, 7, or 8 light head conguration. The light bar will come from the fac-

tory with the Building Fast default pattern for the ArrowStik conguration you ordered. If it is desired to change the pattern in any

of the modes (LEFT, CTR, RIGHT or FLASH) follow the programming procedure outlined. Reference Table 5 for ash patterns.

LEFT CENTER-OUT RIGHT FLASH

1. Building 8HD

2. Building 8HD, 3 Flash

3. Travelling Ball 8HD, 3 Flash

4. Build/Collapse 8HD

Building 8HD

Building 8HD, 3 Flash

Travelling Ball 8HD, 3 Flash

Build/Collapse 8HD

Building 8HD

Building 8HD, 3 Flash

Travelling Ball 8HD, 3 Flash

Build/Collapse 8HD

Quad Fl Even/Odd

Left/Right Flash *

Quad Fl, Left/Right

Travelling Ball Flash

5. Building 7HD

6. Building 7HD, 3 Flash

7. Travelling Ball 7HD, 3 Flash

8. Build/Collapse 7HD

Building 7HD

Building 7HD, 3 Flash

Travelling Ball 7HD, 3 Flash

Build/Collapse 7HD

Building 7HD

Building 7HD, 3 Flash

Travelling Ball 7HD, 3 Flash

Build/Collapse 7HD

Standard Flash *

Quad Flash Standard

Simultaneous Flash *

Quad Fl Simultaneous

9. Building 6HD

10. Building 6HD, 3 Flash

11. Travelling Ball 6HD, 3 Flash

12. Build/Collapse 6HD

Building 6HD

Building 6HD, 3 Flash

Travelling Ball 6HD, 3 Flash

Build/Collapse 6HD

Building 6HD

Building 6HD, 3 Flash

Travelling Ball 6HD, 3 Flash

Build/Collapse 6HD

Even/Odd Flash*

13. Building 5HD

14. Building 5HD, 3 Flash

15. Travelling Ball 5HD, 3 Flash

16. Build/Collapse 5HD

Building 5HD

Building 5HD, 3 Flash

Travelling Ball 5HD, 3 Flash

Build/Collapse 5HD

Building 5HD

Building 5HD, 3 Flash

Travelling Ball 5HD, 3 Flash

Build/Collapse 5HD

Table 5 - Trafc Directing / Trafc Warning Pattern Options - 21TR Plus

Signal Options for ArrowStik® Control

As mentioned previously, the 21TR Plus

will come from the factory with the ArrowStik patterns set in the default conguration,

which is the Building Fast conguration. The current conguration can be determined by observing the operation of the ArrowStik

unit. Note that FLASH Signal Patterns marked with an Asterisk "*" are available in Fast, Medium or Slow ash rate.

Note: It will be important to observe the operation of the ArrowStik unit during the programming procedure while stepping

through the signal options. Signals are available for 5, 6, 7, or 8 head congurations. Also refer to the trafc directing

signal options in Table 2 for the following procedure.

The Pattern Select wire is the BLK/RED wire in the sixteen conductor light bar control cable and is activated by momentarily touching

the wire to +12V.

Step 1

Power-up the light bar by connecting the Red wire to +12V and the Black wire to ground. Select the ArrowStik mode that you wish to

program (LEFT, CENTER-OUT, RIGHT or FLASH).

Step 2

Observe the ArrowStik operation and determine the current mode. Determine what pattern and conguration the control head is cur-

rently in, if not in the factory default. Once the pattern / conguration have been determined, proceed to Step 3.

Step 3

Refer to Table 5, above. This table shows the available patterns for each mode and their order in program memory. Notice that for

the LEFT, CENTER-OUT and RIGHT positions there are four (4) pattern choices; Building, Building with 3 Flash for the end lights,

Traveling Ball with 3 ash for the end lights and Build/Collapse, four (4) congurations for the number of heads; 5, 6, 7, or 8HD and

three (3) speeds; Fast, Medium and Slow. There are a total of twelve possible selections for each conguration of light heads and

then you return to the top selection, Building Fast. Starting from the rst pattern in Table 5 you can step through each pattern, ( 1-4 )

for an 8HD, ( 5-8 ) for a 7HD, ( 9-12 ) for a 6HD, and (13-16) for a 5 HD conguration, by momentarily holding the Pattern Select wire

to +power for 1-2 seconds, until the ArrowStik light heads stop, and then releasing. This will step to the next pattern in Table 5 for the

selected mode. The new pattern is automatically stored each time.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Comentários a estes Manuais

Sem comentários

Code-3 21TR & 21TR Plus Manual do Utilizador Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Iluminação Code-3 21TR & 21TR Plus