Code-3 XT402 & XT602 Manual do Utilizador descarregar pdf

XT402 / XT602 - LED LIGHTS

WIRING INSTRUCTIONS:

To +VDC (fuse @ 3A) ---------------------------------------- RED

To Chassis Ground ------------------------------------------- BLACK

Flash Pattern Select (see list at right) ---------------- BLUE

Connect YELLOW wires of all heads together for

Synchronization ----------------------------------------------- YELLOW

*When the Yellow wires of all heads are connected together, the Group1



based on the pattern selected. For example, if the XT3 lights in Group1







Mount the XTxxx LED light using the brackets supplied and user supplied

mounting screws. Be sure that the unit is properly fused.

CAUTION: Be certain that you have selected a mounting location that will

not interfer with the deployment of the vehicle’s airbags, does not ob-

struct the driver’s vision and allows safe operation of the vehicle. Check

the chosen mounting location to ensure that the vehicle’s structure and

material is adequate to support the weight of your light.

After the XT402 or XT602 light is securely installed, loosen the adjusting

screws Located on each end and tilt the light to the desired angle. Then

tighten the screws. Turn the light on and check the light from the front or

rear of the vehicle, through the window, to ensure that it is at the most

desirable angle, and that the light is not impeded by any obstacles and/or

window tinting.



P1 ve ash alt

P2 ve ash sim p1

P3 ve ash sim p2

P4 quad ash alt

P5 quad ash sim p1

P6 quad ash sim p2

P7 single ash 75 alt

P8 single ash 75 sim p1

P9 single ash 75 sim p2

P10 single ash 375 alt

P11 single ash 375 sim p1

P12single ash 375simp2

P13quad-squad ash alt

P14quad-squad ashsim

P15modulation ash alt

P16modulation ashsim

P17quad-squad scan

P18steadyburn with 5 single & 1 single

P19steadyburn - 5 single

P20steady burn

P21Cycle Flash - AUTORUN

P22off

To select Flash Pattern briey touch the ,

BLUE to BLACK wire (Ground):

- less than 1 second for next pattern

- more than 1 second for previous pattern

- more than 5 seconds to turn off

Available Colors - Red, Amber, Blue, White and Green

This Product contains high intensity LED devices. To prevent eye damage, DO NOT stare into

light beam at close range.

WARNING!

1 2

Resumo do Conteúdo

Página 1 - XT402 / XT602 - LED LIGHTS

XT402 / XT602 - LED LIGHTSWIRING INSTRUCTIONS:To +VDC (fuse @ 3A) ---------------------------------------- REDTo Chassis Ground ---------------------

Página 2 - 

Comentários a estes Manuais

Sem comentários

Code-3 XT402 & XT602 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Iluminação Code-3 XT402 & XT602. Code 3 XT402 & XT602 User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Iluminação Code-3 XT402 & XT602