INSTALLATION&OPERATIONMANUALNIGHTPROBEPATENT PENDINGRead all instructions and warnings before installing and using.INSTALLER: This manual must be
2The use of this or any warning device does not insure that all drivers can or will observe orreact to an emergency warning signal. Never take the ri
3Connect the red and black wires from the NightProbe spotlight as shown in Figure 2. Protect the circuitwith a 15 Amp fuse and use 14 awg (minimum) w
4The Night Probe controller provides a four-position switch for lighthead movement and a push-on/push-offswitch for lamp control. The four-position s
5Parts & Exploded ViewsControl Module1110To Control ModuleTo Control ModuleCR2032 Type Battery
6Parts ListRef No. Description Part No. Qty.1 SMS,Pan Hd Phil. #8 x 1/2"lg 'PT' screw T06828 072 Lower Bulb Shell T06878 013 H-3 100W L
7Troubleshooting Product does not activate a. No power to unit a. Check wiringb. Fuse blown b. Replace fusec. Ignition not on c. Turn on ignitiond. Co
8WARRANTYCode 3, Inc.'s emergency devices are tested and found to be operational at the time ofmanufacture. Provided they are installed and oper
Comentários a estes Manuais