INSTALLATION &

OPERATION MANUAL

Intrepid

Series Interior Lights

WARNING: This product contains high intensity LED devices. To prevent eye damage, DO NOT stare into the light

beam at close range.

WARNING: The use of this or any warning device does not ensure that all drivers can or will observe or react to an

emergency warning signal. Never take the right-of-way for granted. It is your responsibility to be sure you can pro-

ceed safely before entering an intersection, driving against trafc, responding at a high rate of speed, or walking on or

around trafc lanes. The effectiveness of this warning device is highly dependent upon correct mounting and wiring.

Read and follow the manufacturer’s instructions before installing or using this device. The vehicle operator should

insure daily that all features of the device operate correctly. In use, the vehicle operator should insure the projection of

the warning signal is not blocked by vehicle components (i.e.: open trunks or compartment doors), people, vehicles, or

other obstructions. This equipment is intended for use by authorized personnel only. It is the user’s responsibility to

understand and obey all laws regarding emergency warning devices. The user should check all applicable city, state

and federal laws and regulations. Code 3, Inc., assumes no liability for any loss resulting from the use of this warning

device. Proper installation is vital to the performance of this warning device and the safe operation of the emergency ve-

hicle. It is important to recognize that the operator of the emergency vehicle is under psychological and physiological

stress caused by the emergency situation. The warning device should be installed in such a manner as to: A) Not reduce

the output performance of the system, B) Place the controls within convenient reach of the operator so that he can op-

erate the system without losing eye contact with the roadway. Emergency warning devices often require high electrical

voltages and/or currents. Properly protect and use caution around live electrical connections. Grounding or shorting

of electrical connections can cause high current arcing, which can cause personal injury and/or severe vehicle dam-

age, including re. PROPER INSTALLATION COMBINED WITH OPERATOR TRAINING IN THE PROPER USE OF EMER-

GENCY WARNING DEVICES IS ESSENTIAL TO INSURE THE SAFETY OF EMERGENCY PERSONNEL AND THE PUBLIC.

INSTALLER: This manual must be delivered to the end user of this equipment.

WARNING: This unit must be mounted within the interior passenger compartment of the vehicle only. It is not intended

for use in exterior applications. All devices should be mounted in accordance with the manufacturer’s instructions

and securely fastened to vehicle elements of sufcient strength to withstand the forces applied to the device.

THIS UNIT IS NOT DESIGNED TO BE SUSPENDED BY THE SUCTION CUPS ABOVE THE

DASHBOARD. WHEN USING THE SUCTION CUPS FOR INSTALLATION, THE UNIT IS

TO BE PLACED ON TOP OF THE DASHBOARD. THE SUCTIONS CUPS ONLY PREVENT

MOVEMENT OF THE UNIT.

Driver and/or passenger air bags (SRS) will affect the way equipment should be mounted. This device should be

mounted by permanent installation and within the zones specied by the vehicle manufacturer, if any. Any device

mounted in the deployment area of an air bag will damage or reduce the effectiveness of the air bag and may damage

or dislodge the device. Installer must be sure that this device, its mounting hardware and electrical supply wiring does

not interfere with the air bag or the SRS wiring or sensors. Mounting the unit inside the vehicle by a method other

than permanent installation is not recommended as unit may become dislodged during swerving, sudden braking or

collision. Failure to follow instructions can result in personal injury.

1 2 3 4 5 6

Resumo do Conteúdo

Página 1 - OPERATION MANUAL

INSTALLATION &OPERATION MANUAL1IntrepidTM Series Interior LightsWARNING: This product contains high intensity LED devices. To prevent eye damage

Página 2

2Introduction: Read all instructions and warnings before installing and using. The IntrepidTM Lights are for the emergency vehicle market. The light

Página 3 - FIGURE 2

Suction CupPart of T03434 Suction Cup KitsT52218 Bracket, 90 Degree, Intrepid (qty 1)Light Head Assembly (qty 1)(Dual 3LED)See Table for Part NumbersT

Página 4 - FIGURE 6

4FIGURE 5FIGURE 6T52217 Bracket, Base, Intrepid, Dual 3LED (qty 1)T07077 6-32x1/4" Machine Screw (qty 4)T52218 Bracket, 90 Degree, Intrepid (qty

Página 5 - FIGURE 7

Power Requirements CURRENT DRAW Steady Burn (Peak)IntrepidTM Dual 3LED Light Head 1.20 amp average when solid ash pattern chose

Página 6 - PRODUCT RETURNS

WARRANTY Code 3®, Inc.’s emergency devices are tested and found to be operational at the time of manufacture. Provided they are installed and oper

Comentários a estes Manuais

Sem comentários

Assa high security lock Handbücher

Bedienungsanleitungen und Benutzerhandbücher für Nein Assa high security lock.
Wir stellen 1 PDF-Handbücher Assa high security lock zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung