Code-3 LIT3 Mounting Kits Chevy Tahoe Manual do Utilizador descarregar pdf

INSTALLATION &

OPERATION

MANUAL

Read all instructions and warnings before installing and using.

This manual must be delivered to the end user of this equipment.

INSTALLER:

1. Adjust the mounting feet out so the face of the mount is even with the outside end of the light bar lens of

your 47" light bar or 1 5/8" in from the end of the lens for your 52" light bar.

2. Install the rubber pads onto the LIT 3 mounting feet with the thicker edge of the pad facing outboard on the

mounting feet.

3. Choose the proper rubber pads based on the desired mounting position (see Figs 1, 2 & 3). The pads are

marked A, B, C & D per the chart below.

4. Install the thicker mounting pads in the front position on the LIT3 foot (one each side of vehicle) see Fig 1.

5. Install the thinner mounting pads at the rear position of the LIT3 foot (one each side of vehicle) see Fig 1.

6. Center light bar onto roof of vehicle. The outboard roof stiffener ridge should be located at the transition

point of the LIT 3 mounting foot.

7. Position DS and PS brackets onto roof edge of vehicle and mark screw installation points on the vehicle

door frame areas. Use the drill point screws provided with the installation hardware.

NOTE: Use of a punch to center screw locations will also provide greater holding power to screw threads.

8. Install two 3" phillips head SS mounting bolts through mounting brackets and into the cage nut on each

mounting foot. Tighten screws alternately between DS and PS of vehicle until light bar is securely held in the

center of the rooine. The nal torque should be 18 inch lbs for each of the four screws. Do not over tighten.

2007 - 2010

CHEVY TAHOE LIGHT

BAR ROOF MOUNT

ADAPTOR BRACKET

AND LIT3 MOUNTING

FEET

CHEVY TAHOE

IMPOR-

IMPORTANT:

INSTALLER:

Fig 1

1 2

Resumo do Conteúdo

Página 1 - OPERATION

1INSTALLATION &OPERATIONMANUALRead all instructions and warnings before installing and using. This manual must be delivered to the end user

Página 2 - WARRANTY

2Code 3® is a registered trademark of Code 3, Inc., a subsidiary of Public Safety Equipment, Inc.PRODUCT RETURNSIf a product must be returned for repa

Comentários a estes Manuais

Sem comentários

Code-3 LIT3 Mounting Kits Chevy Tahoe Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Code-3 LIT3 Mounting Kits Chevy Tahoe. Code 3 LIT3 Mounting Kits Chevy Tahoe User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Code-3 LIT3 Mounting Kits Chevy Tahoe